Forever Black Bumper & Trim Dye Kit Review
Forever Blackness Tire & Trim Reconditioner is now thicker and easier to use! The kit now also includes a paw held applicator brush for easy awarding.
The permanent solution to dominicus-faded bumpers and trim moldings.
Forever Blackness restores a dark, black, terminate on sun-faded bumpers and trunk moldings. This is not a cosmetic dressing. It's an easy-to-utilise permanent dye. It permanently colors black plastic, rubber and vinyl with the same polymers that the manufacturers apply. Information technology is not a silicone dressing - silicone products volition brand plastic, vinyl and safe appear to accept regained their color merely the alter is temporary. Plus, silicone oils have been known to dry out the applied areas creating a bigger trouble. Silicone also tends to leave a greasy residue even after buffing.
How is Forever Black Different?
ane. Forever Blackness permanently dyes black plastic, prophylactic and vinyl.
two. Forever Black will completely comprehend the worst wax build-upwards or sun-faded trim.
3. Forever Black will not wash off.
iv. Forever Black dries in v to 20 minutes. No buffing is required.
v. Once dried, Forever Black will not attract dust. There is no oily residue.
6. Forever Black has a UV dominicus screen to help shield against future fading.
7. Forever Blackness volition restore bumpers, spoilers, mud guards, door handles, body and trim moldings to a like new status.
Please Note: Forever Blackness Bumper & Trim Dye is intended for porous, textured surfaces. Polish plastic, vinyl, and rubber may not exist able to absorb the dye and it will therefore streak.
It's quick and piece of cake to use!
Each kit contains 4 oz. of Cleaner Concentrate and 6 oz. of Forever Black dye. But sponge surfaces to be treated with the cleaner to remove dirt, grease and dressings. Next, apply a coating of Forever Black using the included hand assist applicator brush. That'southward it! No buffing
is required. In 5 to xx minutes, your trim will
exist permanently black!
Kit will cover the trim on iii to 4 cars.
1621712148
l% Recommend this product (xiii of 26 responses)
Works Great but took several coats...
May 17, 2021
I spent a lot of fourth dimension trying to detect what would work best for my 2000 Chiliad Cherokee, whose bumpers had faded to really actually pale gray in the AZ sun, and this looked to exist all-time.
I'd been using Mother's Back to Black which did picayune and faded away nearly immediately.
I constitute a good review on Youtube that tested several and recommended Forever Black:
https://www.youtube.com/watch?5=fa54ItFIXDM
The stuff works Just it took five coats, then be prepared for some work, if your bumpers are really faded.
I call back expecting this to piece of work in 1 coat on a bumper and trim equally badly faded as mine is asking the impossible anyhow.
People on the forums recommended using a rag and rubbing it in rather than using the included brush.
I suggest doing both since the pointed brush gets the stuff in tight corners that a rag can't.
I did two coats with a rag, then two with the brush, so one with a rag over again and that did it.
Anyway, information technology at present looks amazingly good.
I plan to add a coat of ArmorAll Outlast to protect it.
ProsWORKS! Even on totally faded bumpers like mine.
ConsTakes several coats, which the product should mention as a possibility. Too many people are upset it didn't work in one coat.
good product
June 23, 2018
I take an 02 Silverado with black trim on the bumpers, around the grill and on each side. I take used another production on the trim for quite sometime and after a short time the trim fades from black to grayness. I used the Forever Blackness cleaner then applied the Forever Black dye. Before using the dye i needs to tape around all the surface area to be affected. Forever Blackness was easy to apply and dried in a shine coat. This was just recently done so I am not however able to make up one's mind if the product will fade. I've already recommended Forever Blackness to a friend.
ProsPiece of cake to apply and brings dorsum the original blackness color to the trim.
ConsProduct is hard to remove from areas where it wasn't intended to be used. It's necessary to cover areas where the product in not to be applied.
By John103141
Shoreline, WA
Looks Neat
August 24, 2016
I had a nasty looking front bumper on my Buick LaSabre which had been rubbed down to the orange substrate in some spots. It took me less than an hour to double coat it and it has a truly seamless and bonny appearance.
Good results
May 28, 2016
And so I used this product on a 2004 Honda Crv that sat outside in the Florida sun ,so the black trim and bumpers were very discoloured.I recommend that later on cleaning that y'all mask off any painted area.Also I constitute that several sparse coats work best.
ProsWorked best on the difficult plastic side trim .
ConsLeft a somewhat streaky wait on the soft front bumper.
Not bad Production
March 22, 2016
This Stuff works. Cleaner is crawly. My trim is xv years sometime and required several coats just got uniform coverage... Used with C-quartz and couldn't be happier with the results
Source: https://www.autogeek.net/forblacbumtr.html
Post a Comment for "Forever Black Bumper & Trim Dye Kit Review"